RockJock Currectlync Heavy-Duty Tie Rod System - CE-9701

• Fitment: Direct Fit
• TJ Wrangler - All Models (with stock outer steering knuckles)
• TJ Wrangler Unlimited (LJ) - All Models (with stock outer steering knuckles)
• XJ Cherokee - All Models (with stock outer steering knuckles)
• MJ Comanche - All Models (with stock outer steering knuckles)
• ZJ Grand Cherokee - All Models (with stock outer steering knuckles)
• (1) Tie Rod Assembly
• (1) Drag Link Assembly
• (1) Steering Stabilizer Shock Bracket Kit
• Intended for use with 0–4 in. of lift out of the box
• Can be used with up to 5 in.–6 in. of lift, but requires the use of a 2 in. dropped pitman arm for any lift amount over 4 in
• Vehicles must be equipped with a 2 in. bump stop extension over stock – regardless of lift amount
• For use on factory Dana 30 and Dana 44 differentials – or aftermarket axles that retain the factory outer steering knuckles
• All 4 rod end tapers are designed to fit the vehicles stock, original taper for ease of installation. If your tapers have been enlarged or drilled out – this will no longer be a bolt-on kit
• Tie Rod = 1 1/4 in. dia. solid alloy steel
• Tie Rod Ends = 22mm x 1.5 RH/LH threads, forged steel
• Drag Link = 1 1/4 in. dia. forged steel
• Drag Link Ends = 1 1/8 in.-16 RH/LH threads, forged steel
• Steering Stabilizer Shock Bracket Plate = 1/4 in. laser cut steel
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Shock Absorber - 24-146708

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Front shock
• 1.5"-3" lift
• Collapsed Length (IN): 14.98
• Extended Length (IN): 24.63
• Travel Length (IN): 9.65
• Lower Mount: Eye 12.1mm
• Upper Mount: Stem
• Shaft Diameter: 14mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Antirock Front Sway Bar Kit - CE-9900

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• Front sway bar kit
• SAE 4130 heat treated steel
• Includes all necessary components
• Bushings and hardware included
• Step by step installation instructions
• CAUTION: Jeeps will have more body roll than stock. This sway bar may be used on the street however, it will not provide the same performance as the stock setup
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Ride Height Adjustable Shock Absorber - 24-232173

• Fitment: Direct Fit
• 5100 Series
• Ride Height Adjustable
• Mounting Location: Front
• Finish: Zinc
• Collapsed Length (IN) 17.77
• Extended Length (IN) 24.21
• Reservoir: No
• Body Design: Snap ring grooved body (coilover)
• Body diameter: 46mm
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Heavy-Duty Steering System with Flipped Drag Link - JK-9704P

• Fitment: Direct Fit
• 42mm (1.65") diameter alloy steel tie rod tube with indexed ends for superior strength
• 1.3" diameter solid forged steel “flipped configuration” drag link
• Heavy duty greaseable rod ends for increased strength and long service life
• Double toe adjuster simplifies alignment (eliminates the need to remove stabilizer or ram to adjust)
• Includes stabilizer shock relocation bracket kit
• Compatible with ram assist steering
• Designed for stock height or up to 6" lifted vehicles
• Works with any size tire
• 2-year warranty
• When using with ram assist, be mindful of tube size when purchasing ram bracket
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Shock Absorber - 24-146715

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Rear shock
• 1.5"-3" lift
• Collapsed Length (IN): 15.39
• Extended Length (IN): 26.38
• Travel Length (IN): 10.99
• Lower Mount: Eye 12.1mm
• Upper Mount: Bar pin
• Shaft Diameter: 14mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Shock Absorber - 33-185514

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• 4-5" lift
• Rear shock
• Collapsed Length (IN): 15.41
• Extended Length (IN): 25
• Travel Length (IN): 9.59
• Lower Mount: Eye 12.7mm
• Upper Mount: Bar pin
• Shaft Diameter: 14mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Heavy-Duty Tie Rod - Complete - CE-9701TR

• Fitment: Direct Fit
• 97-06 Wrangler TJ/LJ
• 84-01 Cherokee XJ
• 86-92 Comanche MJ
• 1-1/4" diameter solid alloy steel
• 7/8" thread tie rod ends
• 200% stronger than stock
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Steering Damper - 24-158848

• Fitment: Direct Fit
• 99-05 Ford F-250/F-350
• 00-05 Ford Excursion
• Bilstein 5100 Series Steering Damper
• Collapsed Length (IN): 14.96
• Extended Length (IN): 23.03
• Travel Length (IN): 8.07
• Lower Mount: Eye 12mm
• Upper Mount: Cantilever
• Shaft Diameter: 11mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Antirock Front Sway Bar System - CE-9900JKF

• Fitment: Direct Fit
• 07-18 Wrangler JK, 2 & 4 Door
• Front sway bar
• Includes steel frame brackets
• Increases traction and balance
• SAE 4130 heat treated steel
• Includes all components for installation
• Does not need to be disconnected for off-road use
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 46mm Monotube Shock Absorber - 24-017985

• Fitment: Direct Fit
• 84-01 Cherokee XJ
• No lift
• Front shock
• Body diameter 2 inch
• Monotube
• Boot included
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5165 Series Reservoir Shock Absorber - 25-175783

• Fitment: Universal Fit
• Collapsed Length (in.): 16.97
• Extended Length (in.): 28.52
• Travel Length (IN): 11.55
• Compression: 700
• Rebound: 2550
• Lower Mount: 5/8 inch Eye
• Upper Mount: 5/8 inch Eye
• Shaft Diameter: 14mm
• Reservoir: Yes
• Finish: Zinc Plated
• Body Design: 46mm ID Smooth Body (Non-Coilover)
• Internal Design: Mono tube
• Boot Included: No
• Mounting Parts Included: 1/2 inch sleeves and a reservoir mounting kit
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Shock Absorber - 24-188197

• Fitment: Direct Fit
• 84-01 Cherokee XJ
• 93-98 Grand Cherokee ZJ
• 4" lift
• Front shock
• Collapsed Length (IN): 14.98
• Extended Length (IN): 24.61
• Travel Length (IN): 9.63
• Lower Mount: Bar pin
• Upper Mount: Stem
• Shaft Diameter: 14mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes
• California Residents: WARNING
+ View More Specs - View Less Specs

Bilstein 5100 Series Shock Absorber - 33-066868

• Fitment: Direct Fit
• 84-90 Wagoneer
• 84-01 Cherokee XJ
• Bilstein 5100 Series Shock Absorber
• Collapsed Length (IN): 14.88
• Extended Length (IN): 23.84
• Travel Length (IN): 8.96
• Lower Mount: Eye 16mm
• Upper Mount: Bar pin
• Shaft Diameter: 14mm
• Reservoir: No
• Finish: Zinc plated
• Body Design: 46mm ID smooth body (Non-coilover)
• Internal Design: Mono tube
• Boot Included: Yes
• California Residents: WARNING
+ View More Specs - View Less Specs

RockJock Currectlync Tie Rod Kit - JK-9704TR

• Fitment: Direct Fit
• Tie Rod Kit
• California Residents: WARNING

Bilstein 5100 Series Steering Damper - 24-158428